Front and Back panels
The front and back panels of the enclosure can be
fixed with screws or attached removable using
a panel screw. We recommend removable panels if the enclosure cannot be fully slid out of the swimming pool area and you commonly swim under it. The removable panel can be fitted with lockable panel screws. Depending on the size, the panel can be made as a single piece or in multiple pieces.
Elevated bottom panel edges
This detail facilitates smooth movement of the enclosure for example over an elevated pool border. We offer an elevation of the bottom panel edge, covered by a durable canvas, up to 18 cm. If the elevation is higher, the sealing of the enclosure will be impaired.
The bottom segment of the enclosure panels can be swung upward for easy movement of the structure over obstacles, such as steps or a diving platform. The maximum clapper height is up to half the height of the front/back panel. ATTENTION! Sliding doors cannot be mounted in panels with a clapper. Hinged doors are possible but need to be unhinged before the clapper is opened. We always recommend consulting on the use of a clapper.
is located on the biggest module. Of course, the side entrance is lockable.
Our system allows the wall to fold like an accordion toward the vertical part of the structure, and the roof can be simply retracted. The wall can therefore also serve as a door and it takes up no additional space on the terrace.
Doors in front/back panels
>Hinged (left, right)
>Sliding (lift, right)
>Double-wing (hinged, sliding)
They can be hinged or sliding. The standard width is 80 cm for single-wing and 120 cm for double-wing doors. If the required door width exceeds 90 cm and 140 cm for single-door and double-wing doors, respectively, we recommend using the sliding variant for better resistance. We also recommend sliding doors for higher enclosures. We do not recommend a door in the front/back panel of the Casablanca Infinity enclosure. If a hinged door is positioned off -centre, the hinges need to be placed on the side of the door closer to the axis. Of course, all door types are lockable.
As a standard, each module is supplied with two stoppers in its open/closed position. For even higher safety, the stoppers can be lockable. As a standard, stoppers are installed with access from outside, except for the smallest module, where they are ready for access from inside and are not lockable – if someone is locked under the enclosure, he/she can easily get out.
The enclosure modules have a standard length of 219 cm, unless specified otherwise. The recommended module length ranges between 180 and 250 cm. We do not recommend other values to preserve smooth enclosure movement.
We have listened to you, and we have looked at the existing solutions the market has to offer, all with a clear goal – to offer the best way to automatically set your pool enclosure in motion.